Mission Cables

Mission Cables are designed and tested for use with the Mission Expression Pedals. The cables feature right angled connectors one end for connection to the pedal, and straight connectors the other for connection to the equipment. Like the pedals themselves, the cables are hand assembled in the USA using high quality connectors and oxygen free copper audio cable. Most pedals require TRS cables. Available lengths are 3ft for connection to floor controller, 10ft for large floor rigs or near rack, and 25ft for back to rack connection. The new 3ft TS cable is compatible with any of the Mission Line 6 products.

Mission TT

The Mission TT tap tempo box can be used for tap tempo, sustain, channel switching and similar applications with stomp boxes, loopers, processors and MIDI controllers. There are two versions of the Mission TT tap tempo box. The M version features a momentary switch and a reversal toggle for normally open or normally closed operation. This version is usually required with stomp boxes, loopers and similar processing devices. The L version features a latching switch and a stereo (TRS) output that is usually required when connecting to the expression pedal input on a MIDI controller. The Mission TT-L works with the Voodoo Labs Ground Control Pro MIDI Controller.                 

Mission XPB Series

XPB is an eXpression Pedal in a Box. When you just need to ‘set and forget’ an expression pedal input, or save space and weight on your board, the Mission XPB is the thing. A tiny 2”x 2” aluminum enclosure holds a rotary pot that can be set by hand. A rubber boot, included, allows easy foot control. A ‘glow in the dark’ position marker lets you see your setting on a dark stage. The XPB-R features a TRS output and a mini toggle polarity switch and is compatible with most stomp boxes, MIDI controllers, and processors with an expression pedal input. The XPB-L6 is compatible with any Line 6 expression pedal input including the M9 and M13. The XPB-L6-S replaces the rotary control with a switch that toggles between min and max.

kit-A

Kit-A includes all the parts necessary to convert a Dunlop Crybaby wah pedal into an expression pedal with a switch similar to the SP-1. All the same components used in the SP-1 are included in the kit. SImply remove the existing components from the wah pedal and replace them with those provided. The kit can be ordered with either a latching or momentary switch. Complete instructions are included. Some soldering is required. use of a multimeter is helpful, but not essential.

Switch Kit

Mission switch kits allow the user to upgrade non switching pedals such as the the Mission EP-1 to add switching capability, or to convert pedals between different types of switching. The kit comprises a high quality switch prewired to a Mission TRS jack. The kit includes all necessary hardware. No soldering is required. Switch Kit-M is momentary, Switch Kit-L is latching. Switch Kit-TS is a tip/sleeve wired switch for use with devices that support an external TS switch. Switch Kit-TS can be used to connect to the switch input on a Fractal Audio MFC-101.

Instructions available on the support page.

©2009 Mission Engineering Inc.