Mission Switches and Cables
Don’t forget your expression pedal cables! Mission custom cables with oxygen free copper conductors and high quality right angle connectors are specifically designed for use with your Mission pedal. TRS - TRS in various lengths plus the new TS cable for the Line 6 products are available now.
Mission cables, switches, kits and spares include the Mission TT switch and the new Mission XPB mini expression pedal range. Check them out on the next page.
The sp-1
The first Mission Pedal, the SP-1 is our unique switching expression pedal. The switch is operated by pushing down on the front with your foot in the same way as a traditional wah pedal. This is used to turn a pedal driven effect such as a wah or vibrato on an off at the pedal itself. There are two 1/4” output jacks, one for the expression pedal and one for the switch. The SP1-R option adds a polarity reversal capability. This is a mini toggle switch that reverses the polarity of the potentiometer for compatibility with devices such as MIDI controllers and keyboards that require a reversed polarity. See the support page for more information. The SP-1 and SP1-R can be fitted with an optional LED to indicate latched and unlatched state. This can be used as an effect on/off indicator. The LED is powered by an internal 9v battery (included). The LED option is factory fit only and is not compatible with the SP1-LF or the SP1-LG.
The sp-2
The SP-2 features two foot-switchable channels. The SP-2 does not have a switch output like the SP-1, instead it has two pedal outputs. Operating the switch by pushing down on the front of the pedal with your foot, switches the pedal between the two outputs. An LED indicates which channel is selected glowing blue for channel One and red for Channel Two. This feature allows a single expression pedal to be used with 2 devices, great if you have 2 amps, 2 signal chains, or 2 effects that both need an expression pedal. The SP-2 is also available with the R option mini toggle polarity reversal switch.
The EP-1
The EP-1 is a traditional, single channel expression pedal with no switch, but features the same high quality sealed potentiometer and all metal construction of the other Mission Pedals. The EP-1 is also available with the R option mini toggle polarity reversal switch. The EP-1 works with a wide variety of MIDI controllers, processors, and stomp boxes.
The sp1-lf
The SP1-LF is the result of a partnership between Mission Engineering and Liquid-Control Inc, to provide the best possible expression pedal companion for the Liquid-Foot Pro and Liquid-Foot Jr. controllers. Featuring an expression pedal and switch out similar to the SP-1, each pedal is factory calibrated and tested for optimal performance with your Liquid Foot controller right out of the box. Visit the Liquid-Foot website at http://www.liquid-foot.com for more information on the Liquid-Foot controllers.
The EP1-l6
The EP1-L6 is a plug and play expression pedal for Line 6 amps and effects. Featuring the same all metal construction and high quality components as the other Mission pedals, but with a circuit optimized for best performance with the Line 6 interface, the Mission EP1-L6 is a great companion to the many Line 6 processors such as the Pod HD and the M9 and M13 stomp box modelers. Check out the Mission Line 6 page for info, photos, videos, artist demos and the best prices from Sweetwater and authorized Mission worldwide resellers.
The EP1-TC
The Mission EP1-TC is an expression and volume pedal specifically designed for the TC Electronic G-System. Up to four EP1-TC pedals can be connected to one G-System. Use one pedal for global volume and a second for expression. Maybe add a third as a dedicated wah or whammy pedal. There are numerous configuration options for the G-System. The EP1-TC circuit is designed to carefully match the requirements for the G-System for easy calibration and a full sweep pedal response. Check out the video of the EP1-TC.
The sp1-lg
The Mission SP1-LG is an expression pedal specifically designed for compatibility with the Gordius Little Giant MIDI floor controller. Featuring an expression pedal out and a switch out, the Mission SP1-LG can be used with two cables for true hardware switch operation, or can be used with a single cable and the virtual toe switch function of the Little Giant. Get more information on the Gordius controllers at http://www.gordius.be
The EP-11
The Mission EP-11 is an expression pedal specifically designed for compatibility with the Avid Eleven Rack. The EP-11 has a single expression pedal out that is optimized for full sweep and best performance with the pedal input on the Eleven Rack. The EP-11 features a mode switch that allows the EP-11 pedal to also be connected to a MIDI controller such as the Voodoo Lab Ground Control Pro. The EP-11 comes in a black finish with orange logo to match the Eleven Rack.
spring load option
By popular demand, the Mission custom shop spring load option is now available as a factory fitted standard item on the following expression pedal models - EP-1, SP-1, SP1-LF, SP1-LG, SP-2, EP1-TC, EP1-L6. Whereas the standard pedals will remain in place when you remove your foot, the spring loading causes the pedal to return to a full heel down position. This is a great option for those who are used to the feel of a spring loaded wah, and those who use the auto-engage feature of the Fractal Audio Axe-Fx and others.
Please note that the spring load option is a factory fit item and cannot be fitted or removed by the user to an existing pedal. Pedals can be returned to Mission for upgrade if required.
The EP1-X
The Mission EP1-X features a forward/reverse capability. Designed to work mainly with stomp boxes, in normal mode the minimum value will be at heel down with max at toe down, the same as a standard Mission EP-1. However, the EP1-X has a secret weapon. Flip the toggle switch under the treadle and the direction will reverse. This works great with many stomp boxes such as ring modulators, tremolos, and many others. The EP1-X is especially recommended for use with ring modulation pedals such as the WMD Geiger Counter and Way Huge Ring Worm.
NEW SIGNATURE CHRIS BRODERICK PEDAL
When Megadeth’s guitarist, Chris Broderick, contacted Mission for a customized white expression pedal, we recognized an opportunity to extend to our customers this frequently requested color option. For a limited time only, the SP-1 and EP-1 pedals will be available in this incredible bright white. It’s so gorgeous you might even want to sleep next to it. Get it while supplies last, because this limited edition is white hot!
Trademarks, registered trademarks, product names, logos and other materials are the property of their respective owners.
©2011 Mission Engineering Inc.